MEDIUM
JEE Main/Advanced
IMPORTANT
Earn 100

Correct stability order of the given the free radicals is

11.76% studentsanswered this correctly

Important Points to Remember in Chapter -1 - Organic Chemistry : Some Basic Principles and Techniques from Embibe Experts Gamma Question Bank for Engineering Chemistry Solutions

1. Tetravalency of Carbon:

(i) The atomic number of Carbon is 6 and it has 4 valence electrons. Thus, carbon is always tetra covalent, i.e., it forms 4 covalent bonds with other atoms.

Question Image

(ii) Catenation: The self-linking property of carbon is known as catenation. This is the main reason for the existence of so many compounds.

(iii) Functional Group: An atom or a group of atoms joined in a specific manner, which provides certain characteristic chemical properties to the organic compounds, is called as a functional group.

(iv) Homologues: A group or a series of an organic compound each containing a characteristic functional group from a homologous series. The members of the series are called "homologous".

Question Image

2. IUPAC Nomenclature of Organic Compounds:

Following rules are used to write the IUPAC name of an organic compound.

(i) Longest chain rule: The chain containing the principal functional group, secondary functional group and multiple bonds, as many as possible is the longest possible chain.

(ii) In the absence of a functional group, the secondary group and the multiple bonds, the chain containing the maximum number of C-atoms will be the longest possible chain, for example:

Question Image

(iii) Choose the word root from the table given below for the longest possible chain.

Chain length Word root Chain length Word root
C1

Meth-

C7

Hept

C2

Eth-

C8

Oct

C3

Prop-

C9

Non

C4

But-

C10

Dec

C5

Pent-

C11

Undec

C6

Hex-

C12

Dodec

(iv) Lowest number rule: Numbering is done in such a way that:

(a) Branching, if present, gets the lowest number.

(b) The sum of numbers of side chains is lowest.

(c) The principal functional group gets the lowest number.

(v) Select the principal functional group from the preference series:

-COOH>-SO3H>-COOR>-COX>-CONH2>-CN>-NC>-CHO>C=O>-OH>-SH>-NH2>-OR> = >

Functional groups other than the principal functional group are called as substituents.

(vi) Naming the prefixes and suffixes: Prefix represents the substituent and suffix is used for the principal functional group.

(a) Primary prefixes are cyclo, bicyclo, di, tri, tetra, tetrakis etc.

(b) Secondary prefixes are tabulated below:

Substituent Prefix Substituent Prefix
-F Fluoro -N=N- diazo
-CI Chloro -N=O nitroso
-Br Bromo -NO2 nitro

(c) Primary suffixes are ene, ane or yne used for double, single and triple bonds respectively.

(d) Secondary suffixes axe tabulated below:

Functional group Structure Prefix Suffix
Carboxylic acid Question Image Carboxy -oic acid
Sulphonic acid Question Image Sulpho sulphonic acid
Ester Question Image Alkoxy carbonyl alkyl…oate
Acid chloride Question Image Chloroformyl or Chlorocarbonyl -oyl chloride
Acid amide Question Image Carbamoyl/ Amido -amide
Carbonitrile/Cyanide Question Image Cyano nitrile
Aldehyde Question Image Formyl or oxo -al
Ketone Question Image Keto or oxo -one
Alcohol Question Image Hydroxy -ol
Thio alcohol Question Image Mercapto thiol
Amine Question Image Amino amine
Ether Question Image Alkoxy -
Oxirane Question Image Epoxy -
Nitro derivative Question Image Nitro -
Nitroso derivative Question Image Nitroso -
Double bond Question Image - ene
Triple bond Question Image - yne

(vii) Primary prefix + secondary prefix + Word root + primary suffix + secondary suffix

For example:

Question Image

(viii) If more than two similar functional groups are present, all the group carbon are excluded from principal chain. For example:

Question Image

(ix) Naming of Aromatic compounds: IUPAC accepted their common trivial names, for example

Question Image

3. Isomerism:

(i) Structural isomerism is a form of isomerism in which molecules with the same molecular formula have atoms bonded together in different orders.

(ii) Types of structural isomerism:

(a) Chain isomerism: This type of isomerism is due to the difference in the arrangement of the carbon atoms constituting the chain.

Key points: Parent carbon chain or side chain should be different.

For example: C5H12: CH3-CH2-CH2-CH2-CH3n-pentane and isobutane. 

(b) Positional isomerism: It occurs when functional groups or multiple bonds or substituents are in different positions on the same carbon chain.

Key point: Parent carbon chain remains the same and the substituent, multiple bonds and the functional group changes its position.

For example: C6H4CH32:

Question Image

(c) Functional isomerism: It occurs when compounds have the same molecular formula but different functional groups.

For example: C3H9N:CH3-CH2-CH2-NH21-propanamine CH3-CH2-NH-CH3N-methylethanamine

Question Image

(d) Metamerism: This type of isomerism occurs when the isomers differ with respect to the nature of the alkyl groups around the same polyvalent functional group.

For example: C4H10O:CH3-O-CH2-CH2-CH3 n-propyl methyl ether

CH3-CH2-O-CH2-CH3diethyl ether

(e) Ring-chain isomerism: In this type of isomerism, one isomer is open chain, but another is cyclic.

For example:

Question Image

4. Tautomerism:

(i) This type of isomerism is due to spontaneous interconversion of two isomeric forms into each other with different functional groups in dynamic equilibrium.

(ii) Conditions:

(a) Presence of a

Question Image

(b) Presence of at least one α-H atom which is attached to a saturated C-atom.

For example: Acetoacetic ester.

Question Image

(iii) Enol content

(a) Acidity of α-H of keto form.

(b) Intramolecular H-Bonding in enol form.

(c) Resonance in enol form.

(d) Aromatisation in enol form.

5. Stereoisomerism:

Compounds with the same molecular formula and structural formula but having differences in the spatial arrangement of atoms or groups are called as stereoisomers and the phenomenon is known as stereoisomerism.

6. Geometrical isomerism:

It is due to restricted rotation and is observed in following systems:

Question Image

(i) Cis-trans isomerism: The cis compound is the one with the same groups on the same side of the bond, and the trans has the same groups on the opposite sides. Both isomers have different physical and chemical properties.

For example:

Question Image

(ii) General physical properties of geometrical isomer of but-2-ene

(i) Stability trans > cis
(ii) Dipole moment cis > trans
(iii) Boiling point cis > trans
(iv) Melting point trans > cis

(iii) Calculation of number of geometrical isomers

Unsymmetrical 2n
Symmetrical

2n-1+2m-1

m=n2 (If n is even)

m=n+12 (If n is odd)

Where n= number of sites where GI is possible.

7. Optical isomerism:

Compounds having similar molecular and structural formulae but differing in the stereo chemical formula and the behaviour towards plane polarised light are called as optical isomers and this phenomenon is called as optical isomerism.

(i) Types of optical isomers:

(a) Optically active: dextrorotatory d and laevorotatory l

(b) Optically inactive: Meso

(ii) Condition: Molecule should be asymmetric or chiral i.e., symmetry element (POS and COS) should be absent.

(a) The carbon atom linked to four different groups is called the chiral carbon.

(iii) Fischer projection: An optical isomer can be represented by Fischer projection which is a planar representation of three-dimensional structure.

(a) Fischer projection representation of lactic acid:

(b) (2-hydroxypropanoic acid)

Question Image

(c) Question Image

(iv) Configuration of optical isomer:

(v) Determination of R/S configuration:

(a) Rule-1: Assign the priority to the four groups attached to the chiral carbon according to the priority rule.

(b) Rule-2: If lowest priorityQuestion Imageis bonded to a vertical line then moving.

(c) Question Image

(d) Rule-3: If lowest priorityQuestion Imageis bonded to the horizontal line then moving.

(e) Question Image

(vi) Determination of D/L system:

(a) Reference molecule is glyceraldehyde.

(b) It is used to assign configuration in carbohydrate, amino acid and similar compounds.

(c) Rule: Arrange parent carbon chain on the vertical line.

(d) Place the most oxidised carbon on the top or nearest to top.

(e) On highest IUPAC numbered chiral carbon:

(f) If OH group on RHSD

(g) If OH group on LHSL

(h) Question Image

(vii) CIP Sequence rule: The following rules are followed for deciding the precedence order of the atoms or groups.

(a) Highest priority is assigned to the atoms of higher atomic number attached to asymmetric carbon atoms.

(b) In case of isotopes, isotopes having higher atomic mass are given priority.

(c) If the first atom of a group attached to an asymmetric carbon atom is same, then we consider the atomic number of 2nd atoms or subsequent atoms in a group.

(d) If there is a double bond or triple bond, both atoms are duplicated or triplicated.

(viii) Non-superimposable mirror images are called enantiomers which rotate the plane polarised light up to the same extent but in the opposite direction.

(ix) Diastereomers are stereoisomers which are not mirror images of each other. They have different physical and chemical properties.

(x) Meso compounds are those compounds whose molecules are superimposable on their mirror images despite the presence of asymmetric carbon atoms.

(xi) An equimolar mixture of the enantiomers (d and l) is called racemic mixture. The process of converting d- or l- form of an optically active compound into a racemic form is called racemisation.

(xii) The process by which dl mixture is separated into d and l forms with the help of chiral reagents or chiral catalysts are known as resolution.

(xiii) Compounds containing chiral carbon may or may not be optically active but show optical isomerism.

(xiv) For optical isomers, chiral carbon is not the necessary condition.

(xv) Calculation of number of optical isomers:

The compound if contains Optically active forms Optically inactive forms(meso)
Unsymmetrical 2n Zero
Symmetrical If n= even 2n-1 2n2-1
Symmetrical If n= odd 2n-1-2n-12 2n-12

Where n= number of chiral carbons.

8. Conformational isomerism:

(i) The different arrangement of atoms in space that results from the carbon-carbon single bond free rotation by 0-360 are called conformations or conformational isomers or rotational isomers and this phenomenon is called as conformational isomerism.

(ii) Newman projection: Here two carbon atoms forming the σ bonds are represented, one by circle and the other by centre of the circle. Circle represents rear side C and its centre represents front side carbon. The C-H bonds of front carbon are depicted from the centre of the circle while C-H bonds of the back carbon are drawn from the circumference of the circle.

Question Image

(iii) Conformations of butane:

CH3-CH2-CH2-CH3

Question Image

The order of stability of conformations of n-butane.

Anti-staggered>Gauche>Partially eclipsed>Fully eclipsed.

Relative stability of various conformation of cyclohexane is Chair > twist boat > boat > half chair

9. Fission of a Covalent Bond:

(i) Homolytic cleavage: In this cleavage, one of the electrons of the shared pair in a covalent bond goes with each of the bonded atoms.

Question Image

(ii) Heterolytic cleavage: In heterolytic cleavage the bond breaks in such a fashion that the shared pair of electrons remains with one of the fragments.

Question Image

10. Electrophile:

Electrophiles are electron loving species having at least one vacant orbital in the valence shell.

(i) Charged electrophiles X+, R+ etc.,

(ii) Neutral Electrophiles: E.g., BH3, SO3, AICl3

Note: Electrophiles are Lewis acids.

11. Nucleophile:

(i) Nucleophiles are nucleus loving, they are electron rich having at least one non-bonding pair of electrons in valence shell.

It can be of three types.

(a) Charged Nucleophiles -

Question Image etc.

(b) Neutral Nucleophiles –

Question Image

(c) Ambident Nucleophiles –

Question Image

(both atoms are nucleophilic centre)

12. Electronic displacement effects in covalent bond:

Question Image

(i) Inductive Effect:

(a) The permanent displacement of electrons in a bond towards the more electronegative element is called inductive effect.

(b) The effect provides polarity to the molecule. The property of electron withdrawal shown by an atom or group is its -I effect and that of donation is called +I effect.

(c) Electron donating or electron withdrawal is compared with respect to H.

Question Image

(d) As shown above the charge decreases from first position. Hence inductive effect decreases as the number of bonds increases.

Order of -I effect: CH33N+>-NO2>-CN>-F>-COOH>-Cl>-Br>-I>-OR>-OH>-NH2>C6H5H

Order of +I effect: CH33C->CH32CH->CH3-CH2->-CH3>-H

Uses of Inductive Effect:

(i) Stability of ions:

Stability of ions can be explained by using the concept of inductive effect and hyperconjugation.

(a) Stability of Carbocation

e.g., CH33C+>CH32 CH+>CH3CH2+

(b) Stability of Carbanions

CH33C<CH32CH<CH3CH2 (groups with +I effect decrease the stability of anion)

(b) Acidic Properties:

It is possible to compare the acidic strength of various organic compounds using the inductive effect concept, for example, in carboxylic acid.

The strength of an acid depends on the ease with which it can ionize to give proton or on the stability of the conjugate bases formed, i.e., if the conjugate base formed is more stable, then the acid is more acidic.

Name of Acid Formula Ka Conjugate Base

Fluoroacetic acid

(most acidic)

FCH2COOH 217×10-5

FCH2COO-

(most stable)

Chloroacetic acid ClCH2COOH 155×10-5 ClCH2-COO-
Bromoacetic acid BrCH2COOH 138×10-5 BrCH2-COO-
Iodoacetic acid ICH2COOH 75×10-5 ICH2-COO-

Acetic acid

(least acidic)

CH3COOH 1.8×10-5

CH3-COO-

(least stable)

Increasing stability of the conjugate base increases the acidity of acids.

Furthermore, the inductive effect in di and tri halogenated acids is still more marked with the result that they are progressively more acidic than the corresponding non-halogenated acids.

For example: CHCl2-COOH ;Ka=514×10-5

CCl3-COOH ;Ka=12100×10-5

In general, dicarboxylic acids are stronger acids than monocarboxylic acids, since one of the -COOH group shows -I effect.

(ii) Hyperconjugation:

(a) It is also known as no-bond resonance.

(b) It involves the delocalisation of electrons of C-H bond of an alkyl group directly attached to an atom of unsaturated system or to an atom with an unshared orbital (p or d orbital).

(c) Depending on the number of -H, various hyperconjugative structures are possible.

(d) Greater the number of hyperconjugative structures, higher would be the stability of the given system.

(e) It is also a permanent effect.

Question Image

(f) Less effective π overlap (responsible for hyperconjugative effect).

(g) Stability of substituted alkenes, alkyl carbocations, and free radicals can be explained based on hyper conjugation.

Question Image

(iii) Electromeric Effect:

The temporary electron density charge in substrate in presence of attacking reagent facilitates the attack of attaching reagent is called electromeric effect.

(a) +E effect: When electron density piled on centre to which attacking reagent attacks, then the electromeric effect is +E effect, observed in the presence of electrophile. For example:

Question Image

(b) -E effect: When electron density is removed from the centre to which attacking reagent attacks then electronic effect is -E effect, observed in the presence of nucleophiles. For example:

Question Image

(iv) Mesomeric or Resonance Effect:

(a) The effect involves permanent delocalization of conjugated π electrons in a conjugated system.

(b) Intermediate structures formed are called resonating structures.

(c) The structure that collectively represents all resonating structures is called the resonance hybrid.

(d) Resonating structures are imaginary and have no physical significance.

(e) The average structure i.e., resonance hybrid represents the actual molecule.

(f) Resonance is also known as π -electron delocalisation, which is a permanent effect, it is a distance independent effect.

(g) Normally this effect is more powerful than the hyperconjugative effect.

(h) Resonating structures must be valid Lewis structures, they must have the same position of atomic nuclei, same number of paired and unpaired electrons and the part of molecule taking part in resonance must be planar.

Question Image

(vi) Extent of contribution of various resonating structures:

(a) Resonating structures having maximum number of covalent bonds are more contributing.

Question Image

(b) Non charge separated resonating structures are more contributing than charge separated resonating structures.

Question Image

(c) Resonating structure which places negative charge on more electronegative atoms is more contributing as compared to resonating structure which places negative charge on less electronegative atom.

Question Image

(d) The difference between energies of the most stable resonating structure and the resonance hybrid is called the resonance energy of the molecule.

Question Image

(e) Electron Donating:

Mesomeric Effect (+M Effect): Groups with +M effect releases π-electron towards an unsaturated system. This effect makes certain positions in the molecule of high electron densities. This effect in chlorobenzene is shown as +M Effect

Question Image

(f) Electron Withdrawing Mesomeric Effect (-M Effect): This effect is observed when the displacement of π -electrons from an unsaturated system is towards the atom or group. This effect in benzaldehyde is shown as -M Effect:

Question Image

13. Relative stability order:

(i) Stability of carbocation

Question Image

(ii) Stability of free radical:

Ph3C˙>Ph2C˙H>PhC˙H2>CH2=CH-CH˙2>

CH33C˙>CH32C˙H>CH3C˙H2>C˙H3

(iii) Stability of Carbanion:

Ph3C>Ph2CH>Ph-CH2>CH2=CH-CH2>

CH3>CH3CH2>CH32CH>CH33C

(iv) Acidic strength Stability of conjugate base Ka1pKa

(a) H2O>CHCH>NH3

(b) CHCH>CH2=CH2>CH3-CH3

(c) Question Image

(d) HCOOH>CH3COOH>CH3CH2COOH

(e) Question Image

(f) CCl3COOH>CHCl2COOH>CH2ClCOOH

Question Image

(g)

Question Image

Phenol >m>p>o

(h)

Question Image

p>o>m > Phenol

(i) Question Image

(j)

Question Image

o>p>m> benzoic acid

Question Image

o> benzoic acid >m>p

(k)

Question Image

o>m> benzoic acid >p

(l)

Question Image

o>m>p>benzoic acid

(v) Basic strength of amine:

Basic strength Kb1pKb

(a) In aqueous medium

R-CH3   2>1>3>NH3

R-CH2CH3  2>3>1>NH3

(b) In gaseous medium

R-CH3     3>2>1>NH3

R-CH2CH3   3>2>1>NH3

(vi) Order of electronic effect:

Mesomeric>Hyperconjugation>Inductive effect

(vii) Stability of alkene no. of α –hydrogen:

R2C=CR2>R2C=CHR>R2C=CH2>RCH=CHRtrans form> RCH=CHRcis form>RCH=CH2>CH2=CH2

Heat of hydrogenation 1 Stability of alkene 

14. Detection and Estimation of elements in the organic compounds:

(i) Lassaigne's test for nitrogen:

(a) Lassiagne's extract is heated with FeSO4 solution in the presence of an alkali, the solution is cooled and then acidified with dilute H2SO4.

(b) If a green or blue colouration is obtained, it confirms the presence of N in the organic compound. The chemistry of the test is:

Na+C+NNaCN

From organic compound

2NaCN+FeSO4FeCN2+Na2SO4;FeCN2+4NaCNNa4FeCN6 (Sod. Ferrocyanide)

3Na4FeCN6+4Fe3+ xH2OFe4FeCN63xH2O+12Na+Ferric ferrocyanide Prussian Blue

This test is very delicate and is given by all compounds containing C and N. NH2NH2,NH4Cl,NaNO3, etc. do not respond to this test since they do not contain carbon.

Formation of blood red colour indicates the presence of both N and S.

Na+C+N+S   NaSCN

From organic compound Sod. thiocyanate or Sod. Sulphocyanide

Fe3++NaSCNFeSCN2++Na+Ferric thiocyanate blood red colour

(ii) Detection of sulphur:

If S is present, during fusion with Na metal, Na2S is formed which may be tested as follows:

(a) With sodium nitroprusside violet colouration is produced:

Na2S+Na2FeCN5NOSodium nitroprussideNa4FeCN5NOSViolet colour

(b) With lead acetate, black ppt. of PbS is formed.

Na2S+CH3COO2PbPbS+2CH3COONa

(iii) Detection of halogens:

When the organic compounds are fused with Na metal, the halogens combine with Na to form sodium halides. The presence of these halides is tested with AgNO3 solution.

(a) A white ppt. soluble in NH4OH indicates chlorine.

(b) A pale-yellow ppt. partially soluble in ammonia indicates bromine.

(c) A yellow ppt. insoluble ammonia indicates iodine.

(d) If the organic compound also contains N or S the sodium extract is first boiled with dil. HNO3 to decompose any cyanides or sulphides, otherwise these will form ppt. with AgNO3 solution.

(iv) Detection of phosphorus:

(a) Phosphorus is detected by fusing the organic compound with sodium peroxide, in which phosphorus is converted into sodium phosphate.

(b) The fused mass is extracted with H2O and then boiled with conc. HNO3 and then ammonium molybdate is added. Appearance of yellow ppt. or yellow colouration due to the formation of ammonium phosphomolybdate indicates the presence of phosphorus.

(v) Estimation of carbon and hydrogen:

Liebig's method: A known mass of the organic compound is heated strongly with excess of dry copper oxide in a current of dry air or oxygen (free from CO2) when carbon present in the organic compound compound is oxidised to CO2 and hydrogen to H2O.

C+2CuOCO2+2Cu;    2H+CuOH2O+Cu

Percentage of carbon =1244× Mass of CO2 formed  Mass of substance taken ×100

Percentage of carbon =218× Mass of H2O formed  Mass of substance taken ×100

(vi) Estimation of nitrogen:

(a) Dumas method:

C+2CuOΔCO2+2Cu;   2H+CuOΔH2O+Cu

N+CuON2+ Small amounts of oxides of nitrogen

Oxides of nitrogen +CuΔCuO+N2

Percentage of nitrogen =2822400× Vol. of N2in cm3 at STP Mass of substance taken ×100

(b) Kjeldahl's method:

Organic compound +H2SO4NH42SO4

NH42SO4+ 2NaOHNa2SO4+2NH3+2H2O

2NH3+H2SO4NH42SO4

Percentage of nitrogen:

=1.4×Molarity of the acid ×Vol. of acid used×Basicity of the acid  Mass of substance taken 

(vii) Estimation of halogen and Sulphur: (Carius method):

Percentage of chlorine =35.5143.5× Mass of AgCl formed  Mass of substance taken ×100

Percentage of bromine =80188× Mass of AgBr formed  Mass of substance taken ×100

Percentage of iodine =127235× Mass of AgI formed  Mass of substance taken ×100

Percentage of sulphur =32233× Mass of BaSO4 formed  Mass of substance taken ×100

(viii) Estimation of phosphorus:

A known mass of the organic compound is heated with fuming HNO3 in a Carius tube when phosphorus of the organic compound is oxidized to H3PO4. Phosphoric acid thus formed is precipitated as magnesium ammonium phosphate by adding magnesia mixture (a solution containing MgCl2,NH4Cl and NH4OH.)

Percentage of phosphorus: 62222× Mass of Mg2P2O7 formed  Mass of substance taken ×100

(ix) Estimation of oxygen: A definite mass of an organic compound is decomposed by heating with N2 gas. The mixture is then passed over red-hot coke when all oxygen is converted to CO. This mixture is then passed through I2O5 when CO is oxidised to CO2 producing iodine. The % of oxygen can be derived from the amount of CO2, or I2 produced.

Percentage of oxygen: 1644× Mass of CO2 formed  Mass of substance taken ×100

15. Purification methods:

(i) Distillation Techniques:

  Type Conditions Examples
(A) Simple distillation

(i) When liquid sample has non volatile

İmpurities

(ii) When boiling point difference is 30 K or more.

(i) Mixture of chloroform

BP=334 K, and Aniline BP=457 K

(ii) Mixture of Ether BP=308 K

Toluene BP=384 K

(iii) Hexane 342 K and Toluene 384 K

(B)

Fractional

distillation

When BP difference is 10 K

(i) Crude oil in petroleum industry

(ii) Acetone (329 K and Methyl alcohol 338 K

(C)

Distillation under reduced pressure

(Vacuum distillation)

When liquid boils at higher temperature and it may decompose before BP is attained.

(i) Concentration of sugar juice

(ii) Recovery of glycerol from spent lye.

(iii) Glycerol

(D) Steam distillation

When the substance is immiscible with water and steam volatile.

Question Image

(i) Aniline is separated from water

(ii) Turpentine oil

(iii) Nitro Benzene

(iv) Bromobenzene

(v) Naphthalene

(vi) o-Nitrophenol

(ii) Other Methods of Purification of organic compounds:

(a) Crystallisation: Process of solidification of a pure substance from its dissolved state. This method is based upon differences in their solubility in the given solvent or in mixture of solvents.

(b) Sublimation: It is a process of conversion of a solid into gaseous state on heating without interchanging into liquid. The process is used for the separation of volatile solids, which sublime on heating from the non-volatile solids.

(c) Distillation: It is a process of conversion of a liquid into vapours by heating followed by condensation of vapours. The method is used for the purification of liquids which boil without decomposition and are present with non-volatile impurities.

(d) Fractional distillation: Process used to separate mixture of two or more miscible liquids having different boiling points. It is mainly used in distillation of petroleum, coal tar and crude alcohol.

(e) Distillation under reduced pressure: This process is used when the liquid tends to decompose near its boiling point. Under reduced pressure, the liquid will boil at a low temperature without decomposing.

(f) Steam distillation: Purification of a substance from non-volatile impurities provided the substance itself is volatile in steam and insoluble in water.

(g) Chromatography: Technique of separating the constituents of a mixture by the differential movement of individual components through the stationary phase under the influence of mobile phase. Two types of chromatography:

Question Image