EASY
Earn 100

In the situation shown in the figure, the system is in equilibrium. All the strings, spring and pulley are light. Just after cutting the string AB, then the tension in string GH is α N. Write value of 2α.

(Take, g=10 m s-2)

Question Image

50% studentsanswered this correctly

Important Questions on Laws of Motion

HARD
System shown in the figure is in equilibrium and at rest. The spring and string are massless, now the string is cut. The acceleration of mass 2m and m just after the string is cut will be
Question Image
MEDIUM

A boy throws a cricket ball from the boundary to the wicket keeper. If the frictional force due to air fa cannot be ignored, the forces acting on the ball at the position X are represented by

Question Image

EASY
Question Image
What is the maximum force F that can be applied on block m1, so that both m1 & m2 will move together? There is no friction between m1 and the horizontal table. The coefficient of friction between 'm1' and 'm2' is μ.
EASY
Three blocks A, B and C, of masses 4 kg, 2 kg 1 kg and respectively, are in contact on a frictionless surface, as shown. If a force of 14 N  is applied on the 4 kg block, then the contact force between A and B is:

Question Image
HARD
A rope of length L and uniform linear density is hanging from the ceiling. A transverse wave pulse, generated close to the free end of the rope, travels upwards through the rope. Select the correct option.
MEDIUM
One end of a massless spring of spring constant k and natural length l0 is fixed while the other end is connected to a small object of mass m lying on a frictionless table. The spring remains horizontal on the table. If the object is made to rotate at an angular velocity ω about an axis passing trough fixed end, then the elongation of the spring will be
EASY
A book is lying on a table. What is the angle between the normal reaction acting on the book on the table and the weight of the book?
MEDIUM
1 kg block attached to a spring vibrates with a frequency of 1 Hz on a frictionless horizontal table. Two springs identical to the original spring are attached in parallel to a 8 kg block placed on the same table. So, the frequency of vibration of the 8 kg block is 
MEDIUM

A block of mass 20 kg is suspended through two spring balances with negligible mass as shown in figure. What will be the readings in the upper and lower balance respectively ?

Question Image

MEDIUM

Two masses connected in series with two massless strings are hanging from a support as shown in the figure. Find the tension in the upper string

Question Image

EASY
Which one of the following is not a contact force?
MEDIUM
An automobile moving with a speed of 36 km h-1 reaches an upward inclined road of angle 30°, its engine becomes switch off. If the coefficient of friction is 0.1, then how much distance will automobile move before coming to rest?
EASY

As shown in the figure, an iron block A of volume 0.25 m3 is attached to a spring S of unstretched length 1.0 m and hanging to the ceiling of a roof. The spring gets stretched by 0.2 m. This block is removed and another block B of iron of volume 0.75 m3 is now attached to the same spring and kept on a frictionless incline plane of 30° inclination. The distance of the block from the top along the incline at equilibrium is

Question Image

EASY
When the intermolecular distance decreases due to compressive force, there is
EASY
Electric as well as gravitational affects can be thought to be caused by fields. Which of the following is true for an electrical or gravitational field?
MEDIUM
A balloon with mass m is descending down with an acceleration a (where a<g). How much mass should be removed from it so that it starts moving up with an acceleration a?
MEDIUM
Two blocks A and B of masses 3m and m respectively are connected by a massless and inextensible string. The whole system is suspended by a massless spring as shown in figure. The magnitudes of acceleration of A and B immediately after the string is cut, are respectively
Question Image
EASY

The length of a metal wire is 1, when the tension in it is T1 and is 2 when the tension is T2. The natural length of the wire is:

HARD

A maximum of 3 N force can be applied on a block, down the incline, that would still not move the block which is placed on a rough inclined plane as shown in the figure. The maximum external force up the inclined plane that does not move the block is 12 N. The coefficient of static friction between the block and the plane is Take g=10 m s-2

Question Image

EASY

Two blocks A and B are placed one over the other on a smooth horizontal surface. The maximum horizontal force that can be applied on lower block A, so that A and B move without separation is 49 N. The coefficient of friction between A and B is

Question Image