EASY
Earn 100

Reaction occurs at anode in the electrolysis of fused NaCl is

50% studentsanswered this correctly

Important Questions on Electrolysis

EASY
When electricity is passed through a solution of AlCl2, 13.5 g of Al is deposited at the cathode. The number of faradays passed is
HARD
Two closed bulbs of equal volume V containing an ideal gas initially at pressure pi and temperature T1 are connected through a narrow tube of negligible volume, as shown in the figure below. The temperature of one of the bulbs is then raised to T2. The final pressure Pf is:


Question Image
HARD

An aqueous solution of nickel (II) sulphate was electrolyzed using nickel electrodes. Observe the diagram and answer the question that follows:

Question Image  

  • Which equation for the reaction at the anode is correct?
EASY
In the preparation of chlorine by the electrolysis of brine, the reaction taking place at the anode is
MEDIUM
The product, which is not obtained during the electrolysis of brine solution is
EASY

Which one of the following statements is correct for electrolysis of brine solution?

EASY
One litre of 1 M CuSO4, solution is electrolysed. After passing 2 F charge, the molarity of CuSO4, solution will be:
EASY
If electrolysis of aqueous CuSO4 solution is carried out using Cu-electrodes, the reaction taking place at the anode is
EASY
Electrolysis of concentrated aqueous solution of NaCl results in
HARD

An aqueous solution of nickel (II) sulphate was electrolyzed using nickel electrodes. Observe the diagram and answer the question that follows:

Question Image  

  • Name the cation that remains as a spectator ion in the solution.
EASY
If an aqueous solution of NaF is electrolyzed between inert electrodes, the product obtained at anode is
HARD

An aqueous solution of nickel (II) sulphate was electrolyzed using nickel electrodes. Observe the diagram and answer the question that follows:

Question Image  

  • What do you observe at the cathode and anode respectively?
EASY
A particular adsorption process has the following characteristics: (i) It arises due to van der Waals forces and (ii) it is reversible. Identify the correct statement that describes the above adsorption process:
MEDIUM
Electric current was passed through an aqueous solution of CuSO4 using two Pt electrodes. After some time, the blue colour of the solution disappeared along with evolution of O2 gas. Which of the following statement is correct regarding the resultant solution?
EASY
The electrolytes usually used in the electroplating of gold and silver, respectively, are:
EASY
Which products are obtained during electrolysis of aqueous solution of sodium chloride?
EASY

The pH of the solution _________ during the electrolysis of dilute aqueous solution of CuSO4.

EASY
During the electrolysis of aqueous sodium chloride, the product obtained at anode is
MEDIUM
An aqueous solution of CuSO4 is subjected to electrolysis using inert electrodes. The pH of the solution will