Hydraulic Machines

The area of cross-section of the wider tube shown in figure is $800 {\mathrm{cm}}^2$^​. If a mass of $12 \mathrm{kg}$ is placed on the massless piston, the difference in heights h in the level of water in the two tubes is

For the system shown in the figure, the cylinder on the left at$L$has a mass of $600 \mathrm{kg}$ and cross-sectional area of $800 {\mathrm{cm}}^2$. The piston on the right, at $S$, has cross-sectional area $25 {\mathrm{cm}}^2$ and negligible weight. If the apparatus is filled with oil$\left(\rho =0.75\mathrm{gm} {\mathrm{cm}}^{-3}\right)$. Find the force $F$required to hold the system in equilibrium

A force of $500 \mathrm{N}$ is executed on a hydraulic piston of cross sectional area of $100 {\mathrm{cm}}^2$. The cross-sectional area of other piston which supports a truck of a tonne weight is [use $g=9.8 \mathrm{m} {\mathrm{s}}^{-2}$]

The working of hydraulic lift is based on the principle of

A car hoist is operated by a hydraulic as pictured. Determine compressive force $F$ applied by hydraulic to keep the car-weight $W$ in equilibrium at given position.

​​​​​​​

Which principle works on hydraulic lift?

Write a short note on hydraulic lift.

What is the formula for hydraulic lift?

How braking system in vehicles work?

In a hydraulic lift, the small piston has an area of $2 {\mathrm{cm}}^2$ and the large piston has an area of $80 {\mathrm{cm}}^2$. What is the mechanical advantage of the hydraulic lift?

Find the mechanical advantage of the hydraulic lift.

Mechanical advantage of a hydraulic lift is directly proportional to the:

In a car lift, the mechanical advantage is $2.5$. If the mass of the car to be lifted by the larger piston is $1200 \mathrm{kg}$, calculate the force exerted by the compressed air on the smaller piston. Take  $g=10 \mathrm{m} {\mathrm{s}}^{-2}$.

What do you understand by the mechanical advantage in a hydraulic lift? Explain in brief.

Hydraulic brakes works on the principle of

The mechanical advantage of a hydraulic lift is directly proportional to

Hydraulic brakes works on the principle of

The mechanical advantage of a hydraulic lift is directly proportional to

Derive the expression for hydraulic lift.

A hydraulic lift can lift a maximum load of $3000 \mathrm{kg} \mathrm{wt}$.  The area of cross section of the piston carrying the load is $4.25\times {10}^{-2} {\mathrm{m}}^2$. The maximum pressure the smaller piston would have to bear is